您的位置 首页 技术专栏

浅谈Angular中的预加载配置、懒加载配置

24小时课堂在线收录浅谈Angular中的预加载配置、懒加载配置,本篇文章带大家了解一下Angular中的路由配置,简单介绍一下预加载配置、懒加载配置,希望对大家有所帮助!NgModule作为Angular…感谢您关注浅谈Angular中的预加载配置、懒加载配置。

本篇文章带大家了解一下Angular中的路由配置,简单介绍一下预加载配置、懒加载配置,希望对大家有所帮助!

NgModule作为Angular模块的核心,下面首先就来讲一讲。

1、@NgModule的作用:

NgModule 最根本的意义是帮助开发者组织业务代码,开发者可以利用 NgModule 把关系比较紧密的组件组织到一起,这是首要的。

NgModule 用来控制组件、指令、管道等是否可以使用,处于同一个 NgModule 里面的组件默认互相可见,而对于外部的组件来说,只能看到 NgModule 导出( exports )的内容,也就是说,如果你定义的 NgModule 不 exports 任何内容,那么外部使用者即使 import 了你这个模块,也没法使用里面定义的任何内容。

NgModule 是打包时候用到的最小单位,打包的时候会检查所有 @NgModule 和路由配置,Angular底层是使用webpack打包。因为Angular已经帮我们配置好了webpack,所以开发者轻松很多,否则就需要自己配置环境。

NgModule 是 Router 进行异步加载的最小单位,Router 能加载的最小单位是模块,而不是组件。当然,模块里面只放一个组件是允许的,很多组件库都是这样做的。【相关教程推荐:《angular教程》】

2、@NgModule结构说明:

@NgModule({   declarations: [], //属于当前模块的组件、指令及管道  imports: [], //当前模板所依赖的项,即外部模块(包括httpModule、路由等)  export:[],//声明出应用给其他的module使用  providers: [], //注入服务到当前模块  bootstrap: []//默认启动哪个组件(只有根模块才能设置bootstrap属性)})

3、懒加载说明

(1)RouterModule对象提供了两个静态的方法:forRoot()forChild()来配置路由信息。

forRoot()//在主模块中定义主要的路由信息

forChild()``//应用在特性模块(子模块)中

(2)懒加载:loadChildren

此处并没有将对应的模块加入到AppModule中,而是通过loadChildren属性,告诉Angular路由依据loadChildren属性配置的路径去加载对应的模块。这就是模块懒加载功能的具体应用,当用户访问 /xxx/** 路径的时候,才会加载对应的模块,这减少了应用启动时加载资源的大小。 loadChildren的属性值由三部分组成:

需要导入Module的相对路径

#分隔符

导出模块类的名称

(3)预加载

在使用懒加载的情况下,路由第一次加载某个模块时,有时反应有延迟。这时就可以用预加载策略来解决这个问题。

Angular提供了两种加载策略,

PreloadAllModules-预加载

NoPreloading-没有预加载(默认)。

RouterModule.forRoo()第二个参数可以添加配置选项,配置选项中就有一个是preloadingStrategy配置,这个配置是一个预加载策略配置。

//使用默认预加载-预加载全部模块import { NgModule } from ‘@angular/core’; import { AppComponent } from ‘./app.component’; import { routes } from ‘./main.routing’; import { RouterModule } from ‘@angular/router’; import { PreloadAllModules } from ‘@angular/router’; @NgModule({   declarations: [AppComponent],   imports: [ BrowserModule, RouterModule.forRoot(routes, { preloadingStrategy: PreloadAllModules }) ],   providers: [],   bootstrap: [AppComponent] }) export class AppModule { }

但是,我们更喜欢自己去控制对模块的预加载,这时就需要自定义预加载策略

A、自定义-5秒后加载所有模块

在app组建的同级新建一个custom-preloading-strategy.ts文件

import { Route } from ‘@angular/router’;import { PreloadingStrategy } from ‘@angular/router’;import { Observable } from ‘rxjs/Rx’;export class CustomPreloadingStrategy implements PreloadingStrategy { preload(route: Route, fn: () => Observable<boolean>): Observable<boolean> { return Observable.of(true).delay(5000).flatMap((_: boolean) => fn()); }}

在app.modules.ts的providers中注入

import { BrowserModule } from ‘@angular/platform-browser’;import { NgModule } from ‘@angular/core’;import { AppComponent } from ‘./app.component’;import { HomeComponent } from ‘./home/home.component’;import { routes } from ‘./main.routing’;import { RouterModule } from ‘@angular/router’;import { CustomPreloadingStrategy } from ‘./preload’;@NgModule({ declarations: [ AppComponent, HomeComponent ], imports: [ BrowserModule, RouterModule.forRoot(routes, { preloadingStrategy: CustomPreloadingStrategy }) ], providers: [CustomPreloadingStrategy ], bootstrap: [AppComponent]})export class AppModule { }

B、自定义-指定模块预加载

在app组建的同级新建一个selective-preloading-strategy.ts文件(需要在app-routing.module.ts中的providers注入,然后在路由中定义的data通过附加参数来设置是否预加载)

import { Injectable } from ‘@angular/core’;import { PreloadingStrategy, Route } from ‘@angular/router’;import { Observable} from ‘rxjs/Observable’;import ‘rxjs/add/observable/of’;@Injectable()export class SelectivePreloadingStrategy implements PreloadingStrategy { preloadedModules: string[] = []; preload(route: Route, load: () => Observable<any>): Observable<any> { if (route.data && route.data[‘preload’]) { return load(); } else { return Observable.of(null); } }}

app-routing.module.ts(此文件懒加载与预加载相结合)

import { NgModule } from ‘@angular/core’;import { RouterModule, Routes } from ‘@angular/router’;import { CanDeactivateGuard } from ‘./guard/can-deactivate-guard.service’;import { SelectivePreloadingStrategy } from ‘./selective-preloading-strategy’; // 预加载import { PageNotFoundComponent } from ‘./not-found.component’;const appRoutes: Routes = [{ path: ”, redirectTo: ‘home’, pathMatch: ‘full’},{ path: ‘mian’, loadChildren: ‘./main/mian.module#MainModule’ }, // 懒加载(在这个层级的router配置文件及module文件都不需要引入该组建){ path: ‘home’, loadChildren: ‘./home/home.module#HomeModule’, data: { preload: true } }, // 懒加载 + 预加载{ path: ‘**’, component: PageNotFoundComponent } // 注意要放到最后];@NgModule({  imports: [    RouterModule.forRoot(appRoutes,{      enableTracing: true, // <– debugging purposes only      preloadingStrategy: SelectivePreloadingStrategy // 预加载    })  ],  exports: [    RouterModule  ],  providers: [    CanDeactivateGuard,    SelectivePreloadingStrategy  ]})export class AppRoutingModule { }

4、子路由创建步骤(没有靠指令创建,直接手动)

(1)新建主文件夹

目录main

main.component.html

main.component.scss

main.component.ts

main.module.ts

main-routing.module.ts

main.service.ts

目录A

A.component.html

A.component.scss

A.component.ts

目录B

B.component.html

B.component.scss

B.component.ts

比如在上面main.component.html有个区域用于放子视图(以下我都先讲思路,再放关键代码,其他不赘述)

<div>下面的区域是另一个路由出口</div><router-outlet></router-outlet><!–此处依照下面的路由配置,默认显示AComponent组件的内容–>

(1)、在main-routing.module.ts里面配置文件夹main下的路由,需要引用各组件的component(需要配置路由的组件)

import {NgModule} from ‘@angular/core’;import {RouterModule, Routes} from ‘@angular/router’;import {MainComponent} from ‘./main.component’;import{AComponent} from ‘./A/A.component’;import{BComponent} from ‘./B/B.component’;const mainRoute: Routes = [ { path: ”, component: MainComponent, data: { title: ‘面试预约’, }, children: [ { path: ”,//path为空表示默认路由 component: AComponent, data: { title: ‘大活动’, } }, { path: ‘activity’, component: BComponent, data: { title: ‘中活动’, } } ] }];@NgModule({ imports: [ RouterModule.forChild(mainRoute) ], exports: [ RouterModule ]})export class MainRoutingModule{}

(2)、main.service.ts一般用于放http请求

import { AppService } from ‘./../../app.service’;import { Observable } from ‘rxjs/Observable’;import { Injectable } from ‘@angular/core’;import { HttpParams } from ‘@angular/common/http’;import { PageData, ActivitysManage } from ‘./model/activitys-manage’;import { BehaviorSubject } from ‘rxjs’;import {PageDataBig, ActivitySmall, PageDataSmall } from ‘./model/activitys-manage’;@Injectable()export class MainService { }

main文件夹下的组件如要调用MainService,需要在组件的ts文件引入MainService

(3)、在main.module.ts中引入各组件(包括自身、路由配置文件所用到的所有组件以及路由的module)

import { FormsModule } from ‘@angular/forms’;import { CommonModule } from ‘@angular/common’;import { MainComponent } from ‘./interview-appointment.component’;import { AComponent } from ‘./A/A.component’;import { BComponent } from ‘./B/B.component’;import { NgModule } from ‘@angular/core’;import { CoreFrameCommonModule } from ‘../../common/common.module’;import { MainRoutingModule } from ‘./main-routing.module’;import { NgZorroAntdModule } from ‘../../zorro/ng-zorro-antd.module’;import { MainService } from ‘./interview-appointment.service’;@NgModule({ imports: [FormsModule,CoreFrameCommonModule, CommonModule, MainRoutingModule,NgZorroAntdModule], exports: [], declarations: [MainComponent,AComponent,BComponent], providers: [MainService],})export class MainModule{ }

以上就是浅谈Angular中的预加载配置、懒加载配置的详细内容,更多请关注24小时课堂在线其它相关文章!

本文来自网络,不代表24小时课堂在线立场,转载请注明出处:https://www.24ketang.cn/97682.html

为您推荐

返回顶部